CLUTCH TROUBLE DIAGNOSIS AND CORRECTIONS #5
If your Experiencing Excessive Facing Wear.
| POSSIBLE CAUSES | REMEDIES |
|---|---|
| 1) Insufficient pedal free play. | Set clutch pedal free play at 1 3/8" to 1 9/16" (35 to 40 mm) |
| 2) Driver steps unnecessarily on pedal; this causes facing wear and damage to throwout ring. | Advise driver to discontinue wrong practice and step on clutch pedal only when necessary. |
| 3) Pressure springs weak or broken. | Check pressure springs for tension and replace springs, if they are unserviceable. |
| 4) Driven plate facings installed incorrectly. | Replace facings by new ones and install them correctly. Check driven plate for center. |
Leave a Reply
You must be logged in to post a comment.